CHARACTERISTICS
• Quality without compromise
Aluminium epoxy powder coated cases with drip shield and stainless steel xings withstand the rigors of
adverse environments: heat, humidity and salt air. Circuit boards are protected with an acrylic coating for
maximum corrosion resistance. Temperature sensors ensure that power components will always operate
within speci ed limits, if needed, by automatic reduction of output current under extreme environmental
conditions.
• Universal 90 to 265 Volt input voltage range
All models will operate without any adjustment needed over a 90 to 265 Volt input voltage range, whether
50 Hz or 60 Hz.
• Three outputs that each can supply the full output current
Three isolated outputs to simultaneously charge 3 battery banks. Each output is capable to supply the full
rated current.
• Three stage charging, with temperature compensation
The Centaur charges at bulk rate until the output has reduced to 70% of the rated Amps, at which a 4 hour
timer begins. After the timed period the charger switches to oat rate. An internal temperature sensor is used
to compensate the charge voltage with 2 mV/˚C (1mV/˚F) per cell.
[ 12V: 20-30-40-50-60-80-100-200 A ]
[ 24V: 16-30-40-60-80-100 A ]
CENTAUR BATTERY CHARGER
Battery Monitor
Example
Charging curve
Battery Alarm
An excessively high or low
battery voltage is indicated
by an audible and visual alarm.
1. Fasten the separate mounting
plate (A) to the wall where you
want to place the battery charger,
and simply hook up the Centaur.
2. Secure the bottom of the backside
(B) to the wall.
ACCESSORIES
Centaur Charger 12/20 12/30
24/16
12/40 12/50 12/60
24/30
12/80
24/40
12/100
24/60 24/80
12/200
24/100
Common
characteristics
Input voltage: 90 - 265 VAC or 90 - 400 VDC Input frequency: 45 - 65 Hz Power factor: 1
Charge voltage
‘absorption’ (VDC)
14.3 / 28.5 (1)
Charge voltage
‘ oat’ (VDC)
13.5/27 (1)
Output banks 3
Recommended
battery capacity
(Ah)
80-200 120-300
45-150
160-400 200-500 240-600
120-30 0
320-800
160-400
400-1000
240-600 320-800
800-2000
400-1000
Charge current
(A)(2)
20 30/16 40 50 60/30 80/40 100/60 80 200/100
Total output
ammeter
Yes
Charge
characteristics
IUoUo (Three stage charging)
Temperature
sensor
Internal, -2mV / °C (-1mV / °F) per cell
Forced Cooling Yes, temperature and current controlled fan
Ignition protected Yes
Protection Output short circuit, over temperature
Operating range Temperature: -20 to 60 °C (0 - 140 °F) Humidity max: 95%
ENCLOSURE
Material & Colour Aluminium (blue RAL5012)
AC-connection Screw-clamp 4mm² (AWG 6)
Battery-
connection
IP21
Protection
category
M6 Studs M8 Studs
Weight kg (lbs) 3.8 5 12 16
Dimension
(hxwxd in mm)
355x215x110 426x239x135 505x255x130 505x255x230
STANDARDS
Safety EN 60335-2-29, UL 1236
Emission EN 55014, EN61000-3-2, EN 61000-3-3
Immunity EN 55014-2
1) Standard setting. Optium charge/ oat voltages for Flooded Lead-acid, Gel-Cell or AGM batteries selectable by dip switch.
2) Up to 40 °C (1oo °F) ambient. Output will reduce to approximately 80% of nominal at 50 °C (120 °F) and 60% of nominal at 60 °C (140 °F)
(44 Seiten)
(52 Seiten)
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Kommentare zu diesen Handbüchern