Victron energy 24/30 Spezifikationen Seite 10

  • Herunterladen
  • Zu meinen Handbüchern hinzufügen
  • Drucken
  • Seite
    / 20
  • Inhaltsverzeichnis
  • LESEZEICHEN
  • Bewertet. / 5. Basierend auf Kundenbewertungen
Seitenansicht 9
CHARACTERISTICS
Adaptive 4-stage charge characteristic: bulk - absorption -  oat - storage
The Phoenix charger features a microprocessor controlled ‘adaptive’ battery management system that can be preset to suit
di erent types of batteries. The ‘adaptive’ feature will automatically optimise the process relative to the way the battery is
being used.
The right-amount of charge: adaptive charge
When only shallow discharges occur (a yacht connected to shore power for example) the absorption time is kept short in order
to prevent overcharging of the battery. After a deep discharge the absorption time is automatically increased to make sure
that the battery is completely recharged.
Preventing damage due to excessive gassing: the BatterySafe mode (see  g2. below)
If, in order to quickly charge a battery, a high charge current in combination with a high absorption voltage has been chosen,
the Phoenix charger will prevent damage due to excessive gassing by automatically limiting the rate of voltage increase once
the gassing voltage has been reached (see the charge curve between 14,4 V and 15,0 V in  g.2 below).
Less maintenance and aging when the battery is not in use: the Storage mode (see  g.1 & 2 below)
The storage mode kicks in whenever the battery has not been subjected to discharge during 24 hours. In the storage mode
oat voltage is reduced to 2,2 V/cell (13,2 V for 12 V battery) to minimise gassing and corrosion of the positive plates. Once a
week the voltage is raised back to the absorption level to ‘equalize’ the battery. This feature prevents strati cation of the
electrolyte and sulphation, a major cause of early battery failure.
To increase battery life: temperature compensation
Every Phoenix charger comes with a battery temperature sensor. When connected, charge voltage will automatically
decrease with increasing battery temperature.
Battery voltage sense
In order to compensate for voltage loss due to cable resistance, Phoenix chargers are provided with a voltage sense facility so
that the battery always receives the correct charge voltage.
• Computer interface
Every Phoenix Charger is ready to communicate with a computer through its RS-485 data port. Together with our VECon gure
software, all parameters of the chargers can be customised. The chargers can also be connected to VENet, or to other
computerised monitoring control systems.
[ 12V: 30-50 A ]
[ 24V: 16-25 A ]
PHOENIX BATTERY CHARGER
Battery Monitor
Fig. 1 Fig. 2
Computer controlled
operation and monitoring
(Victron interface Mk2b)
Phoenix Charger Control
Battery Alarm
ACCESSORIES
Phoenix charger
12V/24V
12/30
24/16
12/50
24/25
Input voltage range 90-265 VAC, 90-400 VDC
Frequency (Hz) 45-65, PF:1
Charge voltage ‘absorption’ (V DC) 14.4 / 28.8
Charge voltage ‘ oat’ (V DC) 13.8 / 27.6
Storage mode (V DC) 13.2 / 26.4
Battery bank 3
Charge current house batt. (A)(2) 30/16 50/25
Charge current starter batt. (A) 4
Charge characteristics 4 stage adaptive
Battery capacity (Ah) 100-400
100-200
200-800
100-400
Temperature sensor Yes
Can be used as power supply Yes
Forced cooling Yes
Protection (1) a,b,c,d
Common characteristics Temperature: -20 to 60 °C (0 - 140°F) Max humidity: 95%
ENCLOSURE
Material & Colour Aluminium (blue RAL 5012)
Battery-connection M6 Studs
230 V AC-connection Screw-clamp 4mm²
Protection category IP21
Weight (kg) 3.8
Dimensions (hxwxd in mm) 350x200x108
STANDARDS
Safety EN60335-2-29
Emission EN55014, EN61000-3-2, EN61000-3-3
Immunity EN55014-2
Vibration IEC68-2-6: 10-150Hz/1.0G
Automotive directive 95/54/EC
1) Protection
a. Output short circuit b. Battery reverse polarity detection
c. Battery voltage too high d. Temperature too high
2) Up to 40 °C ambient
Seitenansicht 9
1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 19 20

Kommentare zu diesen Handbüchern

Keine Kommentare