Victron energy 24/30 Bedienungsanleitung PDF herunterladen (Seite 6)

2. Description

Technology

The Centaur Charger is a fully high-frequency switched battery

charger. The input is electronically power factor corrected by the

first power stage.

The next stage gives provision for galvanic isolation and a perfect

DC voltage at the output terminals.

The internal electronic parts are protected against moisture and

dirt by means of a special coating, which assures a long lifetime of

your battery charger.

Three high-capacity batteries can be charged simultaneously with

this charger.

Operation

The battery charger charges the battery with 3-stage (Bulk-

Absorption-Float) charging characteristic. It can remain connected

to the battery continuously, without increased gas formation,

caused by overcharging, taking place.

The charger can be used for different types of batteries but the

default settings are for Gel batteries.

For use with other types of batteries please select Lead acid or

AGM by opening front bottom cover and select dipswitch in bottom

left hand corner. See Figure 1.

The full charging current of this Charger is divided in three main

outputs but any one output can supply 100% of power if that is the

only battery connected.

1 2 3 4 5 6 7 8 9 10 11 ... 14 15

Keine Kommentare

Victron energy 24/30 Bedienungsanleitung Seite 6